HEGGEL® Corr

HEGGEL Corr is a novel and extremely high performance protective coating with superior chemical resistance in a wide thermal range from normal ambient temperature up to 550 °C.

The exclusive properties of HEGGEL Corr are based on its unique molecular structure, which consists of both organic and inorganic molecules.

Accordingly, HEGGEL Corr offers a thermally stable highly crosslinked structure, impermeable properties, superior resistance to extremely aggressive chemical stress and excellent mechanical abrasion resistance.

HEGGEL Corr products are applied as a single layer directly to the substrate and cure at ambient temperatures. The application is carried out by airless spraying or optionally by brush and does not require any primer or undercoat. Long service life and easy repairability are further outstanding features of HEGGEL Corr products.

HEGGEL®️  Corr 210

2-C High-Tech Corrosion Resistant Coating

HEGGEL Corr 210 is an advanced coating system derived from a novel technology that combines, on a molecular level, both organic and inorganic molecules to provide a thermally stable highly crosslinked structure. It offers superior broad range chemical resistance from sub ambient to elevated temperatures in excess of 190°C, after only an ambient cure. The cured coating has excellent sliding abrasion resistance coupled with a very smooth finish that enhances fluid flow and prevents sludge build up. HEGGEL Corr 210 can be steam cleaned at temperatures exceeding 190°C (374°F).

Characteristics:

  • Excellent broad range chemical resistance
  • Resist dissolved H2S at high temperatures
  • In situ application to exterior of hot surfaces
  • Very high fouling resistance     
  • Cleanable using high temperature steam
  • Resistant to CUI service
  • Single coat curing at ambient temperature

HEGGEL®️  Corr 211

2-C High-Tech Coating

HEGGEL Corr 211 is an advanced coating system derived from a novel technology that combines, on a molecular level, both organic and inorganic molecules. It offers superior broad range chemical resistance from sub ambient to elevated temperatures in excess of 170°C, after only an ambient cure. The cured coating has excellent sliding abrasion resistance coupled with a very smooth finish that enhances fluid flow and prevents sludge build up

Characteristics:

  • Excellent broad range chemical resistance
  • In situ application to exterior of hot surfaces
  • Resistant to CUI conditions
  • Single coat curing at ambient temperature
  • Very high fouling resistance

Highlights:

  • High chemical resistance to concentrated/diluted acids and alkalis across pH 1-14
  • Temperature resistance from -50°C to +170°C immersed and +230°C non immersed
  • Self-priming single coat system curing at ambient temperature
  • Easy application by spray / brush / roller
  • Long-lasting impermeability

HEGGEL®️  Corr 212

Superior Corrosion Resistant Coating

HEGGEL Corr 212 is a state-of-the-art semi paste-grade coating system developed from innovative technologies, that meld organic and inorganic molecular structures at the fundamental level. The resulting thermal stability, and highly crosslinked structure, affords an unmatched spectrum of chemical resistance from sub-ambient temperatures to those exceeding 225°C, with only ambient curing required. The cured coating not only offers outstanding adhesive strength but also displays resistance to sliding abrasion and a notably smooth finish, making it ideal for fluid flow enhancement and sludge build-up prevention. HEGGEL Corr 212 is able to withstand steam cleaning process at temperatures above 225°C. Moreover, the option for an on-site application on the exterior of a hot surface is available through HEGGEL Corr 212.

Characteristics:

  • Exceptionally resistant against a wide range of chemicals
  • Demonstrating remarkable level of abrasion resistance and impact strength
  • Self-priming single layer coating
  • Solvent-free
  • Resistant against H2S/Amines even by elevated temperatures
  • Resistant to CUI conditions (Corrosion Under Insulation)
  • Highly resistant against fouling
  • Simple curing process at ambient temperature

Highlights:

  • Outstanding chemical resistance in harsh environments e.g H2S / Amines / 98% H2SO4 / ...
  • Temperature resistance ranging from -70 up to +225°C immersed and +280°C non-immersed
  • Self-priming single coat system curing at ambient temperature
  • Easy application by spray / brush / roller
  • Minimized downtime with fast onsite application due to rapid ambient cure
  • Maximum Dry Film Thickness (DFT) up to 4200 microns

HEGGEL®️  Corr 214

Ultra-High Chemical Resistant Coating

HEGGEL Corr 214 is an advanced coating system derived from a novel technology that combines, on a molecular level, both organic and inorganic molecules to provide a thermally stable highly crosslinked structure. It offers superior broad range chemical resistance from sub ambient to elevated temperatures in excess of 190°C, after only an ambient cure. The cured coating has excellent sliding abrasion resistance coupled with a very smooth finish that enhances fluid flow and prevents sludge build up. HEGGEL Corr 214 can be steam cleaned at temperatures exceeding 190°C (374°F).

Characteristics:

  • Excellent broad range chemical resistance
  • Insitu application to exterior of hot surfaces
  • Very high fouling resistance
  • Cleanable using high temperature steam
  • Resistant to CUI conditions
  • Single coat curing at ambient temperature

HEGGEL®️  Corr 216

High Chemical Resistant Coating

HEGGEL Corr 216 is a 2-component special composite coating featuring a unique molecular structure. Formulated with advanced epoxy resin, it offers superior chemical and temperature resistance on a wide range of substrates. Moreover, it exhibits excellent abrasion resistance and high adhesion strength to various substrates.

Characteristics:

  • Excellent chemical resistance
  • High fouling resistance
  • Superb abrasion resistance
  • Temperature resistance up to 180ºC
  • Solvent-free
  • Single coat curing at ambient temperature
  • Ambient curing coating

HEGGEL®️  Corr 220

High Aggressive Chemicals Resistant Coating

HEGGEL Corr 220 is an advanced resin based coating system modified by PTFE which is designed to protect components that carry highly aggressive chemicals found in the chemical industry. Chemical resistance is especially superior at elevated temperatures where other such coatings will more often than not fail. The coating has exceptional adhesion

Characteristics:

  • Nano-technology based coating with ultra-high resistance to full immersion in concentrated organic/mineral acids, alkalis and solvents at room and elevated temperatures.
  • Cures at ambient temperature.
  • Excellent adhesion.
  • Excellent abrasion resistance.
  • Single coat application without primer

HEGGEL®️  Corr 220 AF

High Aggressive Chemicals Resistant Coating (Anti-fouling Grade)

HEGGEL Corr 220 AF is an advanced resin based coating system modified by PTFE which is designed to protect components that carry highly aggressive chemicals found in the chemical industry. Chemical resistance is especially superior at elevated temperatures where other such coatings will more often than not fail. The coating has exceptional adhesion directly to steel and concrete surfaces and so is ideal for large secondary containment areas.

Characteristics:

  • Nano-technology based coating with ultra-high resistance to full immersion in concentrated organic/mineral acids, alkalis and solvents at room and elevated temperatures.
  • Prevents fouling and sludge build up
  • Cures at ambient temperature
  • Excellent adhesion
  • Excellent abrasion resistance
  • Single coat application without primer

HEGGEL®️  Corr 230

High-Temperature Advanced Anti-Corrosion Coating

HEGGEL Corr 230 is an advanced coating system having a high temperature anticorrosion capability. Excellent adhesion to both metallic and refractory surfaces.

Characteristics:

  • 100% solids inorganic ceramic anticorrosive coating offering temperature resistance of +550ºC
  • Thin film application in 1 coat
  • Resists salt spray
  • Outstanding resistance to thermal shock
  • Self-priming
  • UV resistant
  • Resists thermal cycling

HEGGEL®️  Corr 240

Super Pressure Modified Phenol Resin

HEGGEL Corr 240 cures rapidly to provide a smooth highly abrasion resistance finish that improves fluid flow and prevents build-up of paraffin, asphaltene and scale. An extremely high coating adhesive strength in excess of 4200 psi coupled with resistance to gas permeation allows it to withstand explosive decompression cycles. It is resistant to elevated temperatures up to 180°C dry heat and 150°C under gaseous immersed conditions.

Characteristics:

  • 100% solids modified phenolic epoxy offering excellent resistance to equipment exposed to high-pressure process fluids and gas mixtures
  • specifically designed for gas pressure / separator vessels and down-hole tubulars
  • Excellent resistance to hydrocarbons, water and gases rich in H2S and CO2
  • Excellent resistance to acids and solvents
  • High abrasion and impact resistance
  • Self-priming, single coat system bonding tenaciously to metallic surfaces
  • Resists explosive decompression

HEGGEL®️  Corr 250

Super Alloy Ceramic Metal Epoxy

HEGGEL Corr 250 is a hand applied coating specifically designed for providing very high abrasion resistance to areas suffering erosion and wear damage from impacting particles and especially resistant to fine particle abrasion. Can be applied up to a DFT of 15 mm.

Characteristics:

  • Multi-purpose, 100% solids, ceramic/metal epoxy engineering resurface grade specially designed to protect equipment suffering from corrosion/erosion.
  • Easy application due to extended potlife with short hardening and service time
  • Self-priming bonding tenaciously to steel, stainless steel, cast iron, copper, bronze, aluminium, alloys and concrete.
  • Very high sliding abrasion resistance
  • Very smooth frictionless finish

HEGGEL®️  Corr 260

Ultra Smooth Super Flow Coating

HEGGEL Corr 260 is the ultimate energy efficiency and life extender for critical equipment. Specifically designed to provide an ultra-smooth, frictionless surface that increases fluid flow and prevents cavitation, erosion, fouling and sludge build up. Used as a surface coat in combination with HEGGEL Fix products you can prolong equipment life and increase its initial engineering performance specification. It will reduce the equipment maintenance budget as well as energy consumption thereby reducing overall running cost.

Characteristics:

  • Ultra smooth, hydrophobic, 2-component, 100% solids coating.
  • Provides efficiency enhancement of pumps, infrastructure and equipment where flow resistance must be minimised. New and old equipment can be treated
  • Prevents fouling and sludge build up
  • Self-priming bonding tenaciously to rubber, urethane, steel, stainless steel, cast iron, copper, bronze, aluminium, alloys and concrete.

HEGGEL®️  Corr 270

Solvent-Free, Graphite Modified, Phenolic Lining

HEGGEL Corr 270 (Liquid Graphite) is an advanced coating system designed to protect components that carry fluorinated acids and more specifically hydrofluoric acid at ambient and elevated temperatures. The maximum operating temperature will depend upon the type of chemical being used.

Characteristics:

  • Solvent-free, graphite modified, phenolic lining offering ultra-high chemical resistance to concentrated organic / mineral acids and more specifically concentrated hydrofluoric acid at elevated temperatures up to 100 °C. Can be used up to 180 °C in acid vapours
  • Electrically dissipating
  • Cures at ambient temperature
  • Can be applied to both metallic and concrete surfaces

HEGGEL®️  Corr 280

High-Temperature Corrosion Resistant Coating

HEGGEL Corr 280 is an advanced coating system having a high temperature anticorrosion capability.

Characteristics:

  • 100% solids hybrid ceramic coating offering temperature resistance of +250°C
  • Cures fully at ambient temperature
  • Self-priming thin film application in one coat
  • Outstanding resistance to thermal shock, cycling and abrasion

HEGGEL®️  Corr 290

Advanced Phenolic Hybrid Lining

HEGGEL Corr 290 an innovative, modified phenolic hybrid coating system, is meticulously formulated to provide protection for equipment involved in the conveyance of nitric acid and more specifically, oxygenating chemicals at both ambient and elevated temperatures. The maximum operational temperature resistance depends on the specific chemicals in use.

Characteristics:

  • Solvent-free
  • Exceptional chemical resistance, withstanding oxygenating chemicals, concentrated nitric acid / organic acids.
  • Ambient curing coating
  • Applicable both on metallic and concrete substrates
  • Temperature resistance up to 100ºC and can be used up to 180ºC in acid vapours