HEGGEL Mortar EP 610 is suitable for laying and jointing of wear protection materials or for levelling of uneven substrates. HEGGEL Mortar EP can be applied to both stainless steel and concrete substrates.

Characteristics:

• Resilient at higher temperatures
• Temperature resistance up to +150°C (steel substrates)

HEGGEL EP 611 is a highly wear resistant filler system with hard material fillers based on an epoxy resin.

Characteristics:

• Short curing time
• Highly wear resistant
• Joint less
• Overhead application possible
• Layer thicknesses from 5 mm up to 40 mm
• Temperature resistance up to +150°C (steel substrates)

HEGGEL PL 620 is a two-component mortar based on a modified phenolic resole resin and carbon filler for easy bedding and jointing of acid-resistant ceramic tiles, bricks or carbon bricks.

Characteristics:

• Excellent adhesion to ceramic and carbon bricks
• Extremely high chemical resistance, especially to acids, solvents and weak oxidizing chemicals
• The hardened mortar conducts electricity
• Suitable for linings, where a pre-stressing must be achieved

HEGGEL PL 621 is a black, two-component, cold curing synthetic mortar based on a modified phenol resin with carbon fillers.

Characteristics:

• Excellent adhesion to ceramic and carbon bricks
• Extremely high chemical resistance, especially to acids and solvents
• The hardened mortar is electrical conductive
• HEGGEL PL 621 SOLUTION does not separate water during storage
• Very good application because of dust free fillers

HEGGEL FU 630 is suitable for bedding and jointing of tiles, bricks and fittings made of ceramic or carbon for the production of chemical, thermal and mechanic resistant coatings and protective linings. Main applications are tiling and brick linings in apparatuses for the chemical industry, waste water and process water treatment, in canals, pits and reservoirs, power plants, warehouses and workshops, neutralization- and pickling lines.

Characteristics:

• High mechanical loads
• High temperature resistance up to +180°C
• High temperature resistance

HEGGEL FU 631 is a two-component mortar based on a modified furan resin with carbon filler used for easy bedding and jointing of acid-resistant ceramic bricks, tiles or carbon bricks.

Characteristics:

• Temperature resistance up to 220°C (Dependent on the type of chemical being used)
• Excellent chemical resistance to a wide range of media: Various inorganic and organic acids and alkalis (including hydrofluoric acid), solvents, hydrocarbons, greases, oils and fuels
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Electrically conductive
• Suitable for tank linings, as the relatively high shrinkage does not have as strong an effect here as with large-area floor tilings

HEGGEL FU 632 is a black, two-component, cold curing synthetic resin mortar, based on a modified furan resin with carbon fillers.

Characteristics:

• The hardened mortar is electric conductive
• High chemical resistance against acids, alkalis and certain solvents
• High temperature resistance
• Lower shrinkage then other furan resins
• Low odour
• Long shelf life even at higher temperatures, therefore also suitable in tropic regions

HEGGEL FU 633 is a two-component mortar based on a modified aldehyde-free furan resin used for easy bedding and jointing of acid-resistant ceramic bricks, tiles or carbon bricks.

HEGGEL FU 636 is primarily a bedding and jointing mortar for fixing carbon bricks and tiles in temperate climates (15 - 30oC). It is provided in two-component format, a Furan solution and a catalysed carbon filler powder.

HEGGEL FU 638 is a two-component aldehyde-free mortar based on a modified furan resin and hydrofluoric acid-resistant fillers for easy bedding and jointing of acid-resistant ceramic tiles, bricks or carbon bricks

Characteristics:

• Excellent chemical resistance to a wide range of media: Various inorganic and organic acids and alkalis (including hydrofluoric acid), greases, oils and fuels, solvents and various hydrocarbons.
• Excellent adhesion to ceramic tiles, bricks or carbon bricks
• Temperature resistance up to 180°C (Dependent on the type of chemical being used)
• Electrically conductive
• Economical use due to favourable resin/filler ratio

HEGGEL VE 640 is a two-component, cold curing synthetic resin mortar, based on a Novolac vinyl ester resin with mineral fillers

Characteristics:

• Very good mechanical resistance
• Very good chemical resistance, especially against oxidizing media, as well as many organic compounds
• Fast curing

HEGGEL VE 641 is an epoxy novolac vinylester resin mortar formulated with carbon fillers for facilitating easy laying and jointing of acid-resistant ceramic tiles, bricks, or carbon bricks.

Characteristics:

• Excellent chemical resistance to a wide range of media: Acids, alkalis, solvents and oxidising media.
• High adhesion strength to ceramic tiles, bricks or carbon bricks
• Hydrofluoric acid resistance
• Temperature resistance up to 120°C (Dependent on the type of chemical being used)
• Suitable for both indoor and outdoor applications
• Electrically conductive

HEGGEL SP 660 is a two-component, halogen-free, bedding and jointing mortar based on potassium silicate.

Characteristics:

• Halogen-Free, containing no Fluoride
• Extremely high resistance against acids
• Temperature Resistance up to +900°C

HEGGEL SP 662 is a halogen free potassium silicate mortar, which has been specially designed to be used by spraying (similar to sprayed concrete). HEGGEL SP 662 is a compact system which includes a specially formulated hardener, which by mixing with water, chemically reacts to harden.

Characteristics:

• Halogen free containing no fluorides
• Extremely high acid resistance
• Temperature Resistance to +900°C
• Very good bonding strength to steel
• Nearly the same coefficient of expansion as steel

HEGGEL SP 661 is a potassium silicate mortar with corresponding chemical but higher thermal resistance compared to conventional potassium silicate mortars.

Characteristics:

• Hardening at room temperature therefore self-supporting brickwork, even before sintering
• Fast sintering, which prevents the mortar flowing out of the joints
• Temperature Resistance up to +1400°C
• The expansion coefficient is similar to ceramic bricks

HEGGEL SP 664 is a halogen-free Sodium Silicate mortar, which in order to be applied only needs to be mixed with water; which chemically reacts with the powder to harden. The Hardener and Binder are included in the powder.

Characteristics:

• Halogen-Free containing no fluorides
• Extreme high corrosion protection
• Temperature Resistance to +900° C
• Easy to use

HEGGEL SP 665 is a grey, halogen free sodium silicate mortar, which by mixing with water, chemically reacts to harden. The hardener and binder are included in the powder.

Characteristics:

• Halogen-Free containing no fluorides
• Extreme high corrosion protection
• Temperature Resistance to +900° C
• Easy to use

HEGGEL SP 668 is a halogen-free, two-component water glass mortar designed for bedding and joining of acid-resistant tiles or bricks specially on floors. Tile lining systems bedded and jointed with HEGGEL SP 668 provide strong resistance to chemicals and heat, especially in acidic and neutral environments

Characteristics:

• Excellent acid resistance (not including hydrofluoric acid)
• Highly resistant to oxidizing agents, organic solvents, oils, greases, and fuels
• Water-resistant, suitable for neutral pH environments, and rainwater-resistant, making it suitable for outdoor use
• Temperature resistance up to 450°C (Dependent on the type of chemical being used)
• Can be applied to metal surfaces without pre-treatment
• Halogen-free

HEGGEL EP 671 is a black, three-component, cold curing synthetic mortar based on an epoxy resin with very good resistance against abrasive loads.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 672 is a three-component, cold curing synthetic mortar based on epoxy resin and depending on the application with different fillers.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 673 is a three-component, cold curing synthetic mortar based on epoxy resin and depending on the application with different fillers.

Characteristics:

• Excellent adhesion to concrete and ceramic
• Good chemical resistance
• Nearly shrinkage-free curing

HEGGEL EP 674 ist ein grauer, dreikomponentiger, kalthärtender Kunstmörtel auf Basis eines Epoxidharzes und je nach Anwendungsfall mit unterschiedlichen Füllstoffen. HEGGEL EP 674 eignet sich als Bettungs- und Fugenmörtel für Fliesen, Ziegel und Formteile aus Keramik zum Aufbau einer chemisch, thermisch und mechanisch beständigen Beschichtung oder Auskleidung. Durch seine dichte Beschaffenheit und gute Verträglichkeit mit dem Beton kann oft auf eine spezielle Dichtungsschicht verzichtet werden. Die keramischen Platten können mit HEGGEL EP 674 im Zweibettverfahren direkt auf den Betonuntergrund (auf die aufgebrachte Grundierung) gebettet werden. Darüber hinaus kann HEGGEL EP 674 auf zementären Untergründen als Füll- und Ausgleichsmörtel mit den Schichtdicken von 2 bis 5 mm sowie einer dünnen HEGGEL EP 674-Schutzschicht (Schichtdicke von ca. 0,3 - 0,7 mm) eingesetzt werden.

Characteristics:

• Hervorragende Adhäsion zu Beton und Keramik
• gute chemische Beständigkeit
• Nahezu schrumpffreie Aushärtung
• Universelles "all round" Material

HEGGEL RF 680 is a corundum-based heat-setting refractory mortar which hardens when mixed with water.