Bodenbeschichtungssysteme

Bodenbeschichtungssysteme

HEGGEL®️  POX

HEGGEL® Pox steht für ein breites Sortiment von Epoxidharzsystemen und Belägen mit hoher chemischer, thermischer und mechanischer Beständigkeit.

HEGGEL Pox Harzsysteme werden in einem breiten Viskositätsbereich als Grundierung, Kratzspachtelung und Bindemittel für Mörtel universell eingesetzt, indem sie mit Zuschlagstoffen angemischt werden.

HEGGEL Pox Oberflächenschutzsysteme sind ästhetische und hochwertige Bodenbeschich-tungen mit hervorragender chemischer und thermischer Beständigkeit, Druckfestigkeit und Rutschhemmung.

Die hervorragenden Eigenschaften der HEGGEL Pox Bodenbeschichtungen kommen zum Einsatz für Industrie- und Gewerbeflächen, als Bodenbeläge in der pharmazeutischen Industrie und für Labore, in öffentlichen Gebäuden wie Schulen, Krankenhäusern, Kindergärten, Einkaufszentren und anderen anspruchsvollen Indoor-Projekten.

HEGGEL®️  Pox 401

Epoxy Blast Primer

HEGGEL Pox 401 is a 2-component epoxy temporary protective primer.

HEGGEL®️  Pox 404

2-C-EP-special resin

HEGGEL Pox 404 is a special epoxy resin for damp concrete surfaces. “green” concrete and concrete surfaces where rising damp is expected. HEGGEL Pox 404 has been tested in accordance with TL/TP-BEL-EP of ZTV-BEL-B on old and green concrete. HEGGEL Pox 404 is suitable as primer and key coat. This particular chemical formulation will guarantee excellent adhesion between the substrate and subsequent coats.

HEGGEL®️  Pox 410

All-purpose 2-component epoxy resin for base coats, scratch coats, and as repair mortar

HEGGEL Pox 410 is a high-quality, solvent-free, all-purpose usable, 2-component epoxy resin. HEGGEL Pox 410 is suitable as base coat, for scratch coats, or as levelling mortar for new construction sites, as well as for reconstruction work. Due to its low viscosity and good wettability properties the resin penetrates in the substrate and results in a high-strength foundation for subsequent coatings. HEGGEL Pox 410 is our first recommendation, already for years now, for substrate preparation. The material is very reliable under various construction site conditions.

Characteristics:

  • 100% solids content
  • Approved, high-quality base coat
  • Safe and reliable
  • Resistant to hydrolysis and saponification
  • Good interlayer adhesion
  • All-purpose
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 411

2-component epoxy resin as base coat, filler, and reactive resin mortar

HEGGEL Pox 411 is an unfilled, low-viscosity, and non-pigmented epoxy resin for base coats, scratch coats, and heavy-layered levelling screeds. HEGGEL Pox 411 features good wettability properties and may be filled up to a high grade. Nevertheless it offers good processing properties. HEGGEL Pox 411 cures very well and consistently, and features good adhesion to mineral substrate. To improve interlayer adhesion it is basically recommended to scatter with fire-dried quartz sand, grain size 0.3/0.8 mm.

Characteristics:

  • High solids content
  • Economical
  • Low shrinkage
  • Low viscosity
  • All-purpose
  • Resistant to hydrolysis and saponification
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 412

Moisture-tolerant special base coat

HEGGEL Pox 412 is a 2-component epoxy resin. The material is highly moisture tolerant. HEGGEL Pox 412 humidifies matt-damp surfaces, blocks water, and leads to excellent adhesion. In combination with the degreaser HEGGEL DG 950 oily substrate can be cleaned. Afterwards a base coat can be applied. Because of the very good penetration capability and high wettability properties the material stands the test on critical substrate. The material offers increased adhesive strength for substrate with lacking solidity. Because of its medium viscosity the material is suitable for scratch coats and as a wet bonding course for bonded screed. Good adhesion on blasted steel.

Characteristics:

  • High solids content
  • Low-emission quality
  • Very excellent adhesion
  • Reinforcing
  • High penetration
  • All-purpose application
  • Resistant to hydrolysis and saponification
  • Cures even on damp substrate
  • Increased durability to osmosis
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 413

Moisture-tolerant, rapid-setting, 2-component epoxy resin special primer

HEGGEL Pox 413 is a rapid-setting 2-component epoxy resin. Highly moisture tolerable. HEGGEL Pox 413 humidifies matt- damp surfaces, blocks water, and leads to excellent adhesion. It is available as an alternative product to HEGGEL Pox 412 and is adjusted with rapid curing features. The material combines good adhesion and wettability properties and allows subsequent processing within 4 - 6 hours. HEGGEL Pox 413 is suitable for critical substrate for temperatures above 5 °C / 41 °F. The product is preferably applicable for concrete and screed if a bonding course needs to be reached rapidly. Because of the medium viscosity the material is suitable for scratch coats and as a wet bonding course for bonded screed. HEGGEL Pox 413 offers very good adhesion on sand-blasted steel.

Characteristics:

  • High solids content
  • Rapid-setting
  • Very high adhesion
  • Strain strengthening
  • All-purpose application
  • Resistant to hydrolysis and saponification
  • Cures even on damp substrates
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 414

2-C- primer and laminating resin

2-component colourless, primer and laminating resin based on an epoxy resin.

Characteristics:

  • Direct adhering primer on steel and concrete surfaces
  • Excellent chemical resistance
  • High temperature resistance up to +160°C (dry)

HEGGEL®️  Pox 415

Rapid-setting, 2-component epoxy resin for base coats, scratch coats, and as repair mortar

HEGGEL Pox 415 is a 2-component, solvent-free epoxy resin, setting at lower temperatures and rapid-setting at regular temperatures. Suitable for base coats and levelling coats where a speedy return for subsequent coatings is needed. HEGGEL Pox 415 may usually be accessed after only 2 - 4 hours for subsequent coating work. Therefore the material offers a considerable time advantage against other base coats. The time advantage of HEGGEL Pox 415 is especially considerable on small areas and for reconstruction with a small time frame for fitting and curing. HEGGEL Pox 415 cures even at lower temperatures above 0 °C / 32 °F dependably, which is beneficial during the cold season. .

Characteristics:

  • High solids content
  • Rapid-setting
  • Fast curing for resuming work
  • Time-saving
  • Very fast accessible
  • Resistant to hydrolysis and saponification
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 416

Rapid-setting, 2-component epoxy resin for base coats, scratch coats, and as repair mortar

HEGGEL Pox 416 is a high-quality low-emission, and all-purpose applicable, 2-component epoxy resin based on the exceptionally established HEGGEL Pox 410. Use HEGGEL Pox 416 as base coat, for scratch coats, or as levelling mortar for reconstruction or new constructions. Due to its low-viscosity and good wettability properties the resin penetrates very well into the substrate and develops a high-strength base for subsequent coatings.

Characteristics:

  • High solids content
  • Low VOC emission
  • All-purpose usage
  • Safe and reliable
  • High-quality base coat
  • Resistant to hydrolysis and saponification
  • Very good wet-film stability
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 417

2-component epoxy resin emulsion base coat, rapid-setting

HEGGEL Pox 417 is a 2-component, ready-to-use, and rapid-setting, solvent-free epoxy resin emulsion. HEGGEL Pox 417 is used as base coat prior to the application of water vapour permeable coatings and sealers. In combination with HEGGEL Pox 482 and HEGGEL Pox 433 water vapour permeable coatings may be generated. Use HEGGEL Pox 417 predominantly when vapour tight base coats are not suitable. Necessary within the system on water vapour permeable coatings, e.g. on damp, early age concrete, magnesia substrate, susceptible to moisture and similar substrate. The product cures by dehydration of the contained water and subsequent chemical cross-linking into a consistent, robust film with good adhesion. Due to its penetrating adjustment the substrate will be very well dampened, resulting in an excellent adhesive foundation for subsequent coatings. Absorbency will be reduced, dust will be bound. In addition the subsequent coating will result in a smooth, sealed surface for spread coatings. HEGGEL Pox 417 cures rapidly, within 2 - 7 hours, ready for subsequent coatings. The end of pot-life is not visible. Excellent adhesion on different substrate, like concrete, cement screed, magnesia and similar screed, as well as on older synthetic resin coatings. HEGGEL Pox 417 results in a hard, physiologically harmless film. The cured coating offers resistance to water, aqueous salt solutions, diluted acids and bases. Conditionally resistant to solvents.

Characteristics:

  • Ready-to-use
  • Convenient application
  • Rapid-drying and curing
  • Low-emission quality
  • Solvent-free
  • Excellent adhesion
  • Water vapour permeable
  • Easy to use
  • Environmentally friendly

HEGGEL®️  Pox 418

Electrically highly conductive 2-component epoxy resin base coat, low-emission

HEGGEL Pox 418 is a product used in combination. Suitable for electrically conductive coatings. The highly conductive base coat is used as an interlayer applied on cured base or scratch coats with affixed copper bands. The highly diagonally conductance compensates the superposed coatings. HEGGEL Pox 418 consists of an easy to process and economical 2-component epoxy resin emulsion which may be applied with a roller. Because of its composition a good interlayer adhesion is achieved and solvents are not in use.

Characteristics:

  • High electric conductivity
  • Good processing conditions
  • Solvent-free
  • Economic consumption
  • Resistant to hydrolysis and saponification
  • Suitable also for ESD-coatings in combination with other products
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 419

Low-emission, 2-component epoxy resin special primer with higher moisture tolerance for fresh substrates, substrates with an increased humidity or weak

HEGGEL Pox 419 is a new, low-emission, 2-component epoxy resin special primer. The product is modelled after our trusted HEGGEL Pox 412 primer. Like HEGGEL Pox 412, HEGGEL Pox 419 has an excellent wetting behaviour and penetrating power on the most diverse substrates. Due to its high humidity tolerance, the primer is particularly suitable for fresh substrates with a high humidity. HEGGEL Pox 419 corresponds to the latest generation of low-emission epoxy resins, and it is free of solvents, benzyl alcohol, and alkyl- phenols. HEGGEL Pox 419 can be used as primer and scratch coat before the installation of other coatings. As a highly adhesive primer, it is particularly suitable also in the renovation of substrates. The adhesion strength can often be improved by the primer. The primer can be used as osmotic braking and vapour barrier primer for the preparation of coatings as well as with other coverings. If necessary, the installation has to be carried out in two times. The primer can be used on fresh concrete up to a max. 6 CM-%, so that the special requirements can be met. If necessary, seek advice! HEGGEL Pox 419, used in combination with other layers, serves a low-emission barrier. In combination with the degreasing agent HEGGEL DG 950, oil contaminated substrate are first cleaned, and subsequently primed with HEGGEL Pox 419.

Characteristics:

  • High solids content
  • Low-emission according to AgBB
  • Free of alkylphenols and benzyl alcohol
  • Higher moisture-resistance
  • Higher penetration and good wettability
  • Universal and reliable
  • Increased durability to osmosis
  • Barrier against raising damp
  • Universally applicable
  • Resistant to hydrolysis and saponification

HEGGEL®️  Pox 420 & HEGGEL®️  Pox 420 RAPID

Pigmented 2-component epoxy resin self-levelling-coating &  Rapid-setting, pigmented 2-component epoxy resin self-levelling-coating

HEGGEL Pox 420 and HEGGEL Pox 420 RAPID are solvent-free, self-levelling, 2-component, epoxy resin coatings for hard and smooth surface finishes, as well as for scattered, slip resistant finishes. Especially suitable for industrial areas. The material offers excellent self-levelling and smoothing properties. HEGGEL Pox 420 offers regular processing and curing time. HEGGEL Pox 420 RAPID offers the more rapid curing alternative. Both coating materials may be filled with quartz sand (grain size 0.1/0.3 mm), beneficial and economical for layers above 2 mm. Both high-quality standard materials offer well-balanced properties. The cured coating offers very good resistance to mechanical load and good resistance to different chemicals. The coating is resistant to water, salts, salt solutions, alkalis and bases, as well as diluted mineral acids, such as hydrochloric and sulphuric acid. Good resistance to many solvents such as benzene, fuel, grease, oil, and so on. Limited resistance to concentrated mineral acids, diluted organic acids such as acetic acid, lactic acid, and so on. Not permanently resistant to chlorinated hydrocarbons, ester, concentrated nitric acid, and so on. Please obtain advice for any special requirements to resistance. HEGGEL Pox 420 and HEGGEL Pox 420 RAPID can be supplied in a variety of colours although slight colour deviations may occur due to technical reasons. Epoxy resin coatings are subject to colour changes which may become visible when using pale colours and the rapid-setting version.

Characteristics:

  • Good self-levelling properties
  • Fillable with sand
  • Abrasion resistant
  • Coloured, glossy surfaces
  • Resistant to water and chemicals
  • Only slightly yellowing
  • Standard- and rapid-setting
  • Solvent-free

HEGGEL®️  Pox 421

Chemically highly resistant, 2-component epoxy resin coating for WHG-applications (Water Household Act)

HEGGEL Pox 421 is a crack-bridging and solvent-free, 2-component epoxy resin flow-coat with very good chemical resistance. The coating is suitable for the application in collection trays and -rooms such as production / handling areas and storage / handling areas which have to be equipped with coating systems tested in accordance with the WHG. The coating is suitable for fork-lift traffic. HEGGEL Pox 421 offers very good resistance to chemicals. The material is resistant to solvents, oil, mineral acids, alkalis, salts, and many others. Due to the special formula alteration in colour is possible during aging, technical properties do not change though. The effect of chemicals may cause discolouration but does not affect the function of the material. HEGGEL Pox 466 offers a conductive adjustment which can be used when electrical conductivity is required. The product is especially suitable for areas where explosion protection is required. It is also suitable for production areas with demand to electrostatic control, like in chemical and pharmaceutical storage / handling areas, production / handling areas, and other manufacturing areas with high exposure to chemicals.

Characteristics:

  • Highly chemically resistant
  • Crack-bridging (0.2 mm)
  • Suitable for vehicle traffic
  • Solvent-free
  • Free of deleterious substances against varnish
  • Liquid tight

HEGGEL®️  Pox 422

Chemical resistant, 2-component epoxy resin coating

HEGGEL Pox 422 is a solvent-free, 2-component epoxy resin flow coating with increased chemical resistance. The cured coating is suitable for commercially and industrially used areas with an increased demand to chemical resistance. Application is suitable for many industrially and commercially used areas where the focus is on the resistance of the coating. HEGGEL Pox 422 offers good resistance to chemicals, like e.g. alkalis, oil, grease, water, salt-solutions, and different acids. To ensure the suitability for your demand please note the resistance-chart and seek technical advice. If explosion prevention is needed, the electrically conductive product HEGGEL Pox 460 offers an alternative.

Characteristics:

  • High-quality compounds
  • Good chemical resistance
  • Good resistance to solvents
  • Solvent-free
  • Resistant to hydrolysis and saponification
  • Pale, pigmented surface
  • Wear and tear-resistant

HEGGEL®️  Pox 430

All-purpose, pigmented 2-component epoxy resin coating and top coat

HEGGEL Pox 430 is an all-purpose, solvent-free, pigmented, 2-component epoxy resin coating for hard-wearing industrial coatings. HEGGEL Pox 430 is high-quality adjusted, with very good coverage. Due to the low viscosity the product is suitable for rolled coatings, as well as top sealing coat for scattered, slip resistant coatings. The material is suitable for smooth coatings for 1 - 4 mm layers. The coating material may be mixed with fire-dried quartz sand (grain size 0.1/0.3 mm) up to 0.7 parts by weight. Mixing with quartz sand is useful and economic for layers starting at 2 mm. The coating material has good pro- cessing-, self-levelling and smoothing properties. HEGGEL Pox 430 has well balanced properties and may be used all-purpose. Because the product is multi-purpose and has a wide range of application possibilities the amount of material to be stored may be reduced. The cured coatings are very resistant to mechanical load and different chemicals. The coating is resistant to water, salt, salt solutions, alkaline and bases, as well as diluted mineral acids, like salt or sulphuric acid. There is also a good resistance to many solvents like benzene, fuel, grease, oil, and so on. Conditional resistance to concentrated mineral acid. Short-term resistance to concentrated and diluted organic acids like formic or acetic acid. Nondurable resistance to chlorinated hydrocarbon, ester, concentrated nitric acid, and others. For special demands to resistance obtain advice. HEGGEL Pox 430 is available in different colours. Slight colour alterations may be possible due to technical reasons. Pale colour epoxy resin coatings may show slight colour alterations, which may become visible. For an epoxy resin product HEGGEL Pox 430 shows only slight colour alterations though.

Characteristics:

  • Good self-levelling properties
  • Suitable even for thin coatings
  • All-purpose use
  • Coloured glossy surface
  • Can be filled with sand
  • Water and chemical resistant
  • Wear-resistant
  • Only slightly yellowing
  • Reduced stock
  • Solvent-free
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 440

2-component coating resin, solvent-free

HEGGEL Pox 440 is a pre-formulated, 2-component epoxy resin binding agent. An economical coating for commercially and industrially used floors in combination with additives. HEGGEL quartz sand-mix 2/1 will be added on site to the unfilled coating depending on the particular application and thickness of layers. The unfilled binding agent combination is economically fillable. The mixture is easy to process and may be applied with a coating knife and offers very good technical properties. The cured coating offers a very high durability and very good resistance to a wide range of chemicals. HEGGEL Pox 440 is resistant to water, salts, salt solutions, alkalis and bases, as well as diluted mineral acids like hydrochloric acid and sulphuric acid, as well as benzene, fuel, grease, oil, and so on. Conditionally resistant to concentrated mineral acids, organic acids, such as formic acid, acetic acid, and concentrated lactic acid, etc. Not permanently resistant to chlorinated hydrocarbons, esters, concentrated nitric acid. For any special requirements to resistance please obtain advice!

Characteristics:

  • Solvent-free
  • Very economical
  • Good filling capacity
  • Good resistance range
  • Resistant to hydrolysis and saponification
  • Hard, abrasion-resistant finish
  • Reliable quality

HEGGEL®️  Pox 450

High-quality 2-component epoxy resin flow-coating

HEGGEL Pox 450 is a solvent-free, pigmented flow-coating based on a 2-component epoxy resin with very good flow- and smoothing properties. Due to its good flow properties coatings starting at 1 mm can be applied depending on the demands to the floor. HEGGEL Pox 450 contains high-quality resin components and is high in binding agents. Economic solutions can be achieved by addition of fire-dried quartz sand, especially for increased layer coatings. The product features easy handling and high class appearance. Cured coatings are suitable for commercially and industrially used areas. HEGGEL Pox 450 is more formable than usual epoxy resin coatings and furthermore has an excellent wear resistance. HEGGEL Pox 450 shows good resistance to yellowing. Therefore it is very suitable for pale colour tones. HEGGEL Pox 450 offers good resistance to chemicals, e.g. to bases, oil, grease, solvents, water, salt solutions, and different acids. For any special demands to the resistance please obtain advice.

Characteristics:

  • Solvent-free
  • Smooth, pigmented surface
  • Lean consistency
  • Well-balanced stability
  • Resistant to hydrolysis and saponification
  • Fillable with fire-dried quartz sand
  • Energy-elastic and wear-resistant

HEGGEL®️  Pox 455 & HEGGEL®️ Pox 455 Clean

Low-emission, 2-component epoxy resin coating &  Low-emission, 2-component epoxy resin coating, for the creation of jointless floors with higher hygiene requirements

HEGGEL Pox 455 is a high-quality, self-levelling, solvent-free and low-emission, 2-component epoxy resin coating for robust, smooth coatings, as well as for scattered coatings especially for the usage in industrial areas. HEGGEL Pox 455 Clean is a 2-C epoxy resin coating provided with a preventive protection against bacterial contamination. This assists the production of permanently hygienic surfaces, even between the necessary cleaning and disinfection cycles. Note: The processing information and the technical data of HEGGEL Pox 455 Clean do not differ from the standard product. The coating offers good self-levelling and smoothing properties and cures very well. HEGGEL Pox 455 may be blended with quartz sand which is beneficial and economical for layer thicknesses over 2 mm. HEGGEL Pox 455 has a well-balanced chemical resistance. The cured coating is very resistant to mechanical load and has good resistance to different chemicals. The coating is resistant to water, salt, salt solutions, alkalines and bases, grease, oil, as well as diluted mineral acid, like salt- and sulphuric acid. Short-term resistance to solvents like benzine, fuel and so on. Very short-term resistance to concentrated mineral acids, organic acids like formic acid, acetic acid, lactic acid and so on. HEGGEL Pox 455 is not resistant to chlorinated hydrocarbon, ester or nitric acid. Please obtain technical advice for chemical resistance requirements. HEGGEL Pox 455 can be provided in different colours.

Characteristics:

  • Low-emission
  • Smooth, pigmented surface
  • For scattering with silicium-carbide/delustering agent
  • Well-balanced stability
  • Resistant to hydrolysis and saponification
  • Fillable with sand
  • Tough and wear-resistant

HEGGEL®️  Pox 460

Chemical-resistant, electrically conductive, 2-component epoxy resin coating

HEGGEL Pox 460 is a pigmented, solvent-free, electrically conductive 2-component epoxy resin flow coating with very good resistance to different chemicals. The cured coating is especially suitable for commercially and industrially used areas with antistatic or electrically conductive flooring and the requirement to very good chemical resistance at the same time. Due to the special conductive fiber technology even pale colours are available. Suitable for many different industrially used areas, e.g. rooms with flammable fluids and chemicals requiring explosion protection. The smooth coating is suitable for production areas, factories, laboratories and other areas with increased exposure to chemicals. HEGGEL Pox 460 offers good resistance to chemicals, e.g. different solvents, acids, bases, oil, grease, salt, and solutions. Please note the chart for resistance and seek advice to make sure that the coating is suitable for the desired requirements.

Characteristics:

  • Electrically conductive
  • Good resistance to chemicals
  • Good resistance to solvents
  • Solvent-free
  • Resistant to hydrolysis and saponification
  • Pale, pigmented surface finish, hard and wear resistant
  • Free of deleterious substances against varnish

HEGGEL®️  Pox 466

Electrically conductive, highly chemically resistant, 2-component epoxy resin coating for WHG-applications

HEGGEL Pox 466 is a solvent-free, electrically conductive and crack-bridging, 2-component epoxy resin flow-coat with very good chemical resistance. The coating is suitable for the application in collection trays and -rooms such as production / handling areas and storage / handling areas which have to be equipped with coating systems. The conductive property ensures protection against explosion. The material is especially suitable for production areas in the chemical and pharmaceutical industry, in laboratories, but also for other manufacturing areas with high exposure to chemicals. The coating is suitable for fork-lift traffic. HEGGEL Pox 466 shows good resistance to chemicals. The material is resistant to solvents, motor fuel, oil, mineral acids, alkalis, and salts. Due to the electrically conductive adjustment alteration in colour is possible for technical reasons. Colour alteration due to aging will not change the technical properties. The effect of chemicals may cause discolouration but does not affect the properties of the material.

Characteristics:

  • Electrically conductive
  • Highly chemically resistant
  • Crack-bridging (0.2 mm)
  • Suitable for vehicle traffic
  • Solvent-free
  • Free of deleterious substances against varnish
  • Liquid tight

HEGGEL®️  Pox 469 & HEGGEL®️  Pox 469-R10 & HEGGEL®️  Pox 470 & HEGGEL®️  Pox 470-R10

Pigmented 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface &  Pigmented and slip resistant 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface &  Clear 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface &  Clear and slip resistant 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface

HEGGEL Pox 469 and HEGGEL Pox 470 are both 2-component and according to the AgBB low-emission epoxy resin sealer. HEGGEL Pox 470 is used as a clear, matt top coat for reactive resin coatings. Color flakes may be added. HEGGEL Pox 469 can be used as a covering pigmented sealer on epoxy resin coatings. Both top coats result in even semi-matt surfaces, adding an even nice appearance. "Mirror effects" of glossy coatings will be considerably reduced. HEGGEL Pox 469 and HEGGEL Pox 470 may replace sealers containing solvents in many areas which offers convenient to work with and environmentally friendly alternative materials. Use short piled rollers carrying out criss-cross strokes. Aligned curing results in even surfaces. HEGGEL Pox 469 and HEGGEL Pox 470 show good adhesion on many substrates. After adhesive tensile testing the sealer may be used on older substrates as well. Sealer with an additionally slip resistance effect can be delivered with the special products HEGGEL Pox 470-R10 and HEGGEL Pox 469-R10. They are accredited with the slip resistance grade R10, according to DIN 51130 and BGR 181. Processing the epoxy coatings with a lint-free velour roller, results in an even surface with slip resistance grade R10 after curing. The product cures by drying and chemically cross-linking resulting in a sturdy consistent film with good adhesion. Completely cross-linked coatings are resistant to many chemicals, especially to water, salts, aqueous acids and alkalis, oil as well as many different solvents.

Characteristics:

  • Drivable
  • Resistant to abrasion
  • Flexibilised
  • Resistant to permanent moisture
  • Slip-resistant
  • Resistant to de-icing salts
  • Resistant to glycol, oil and battery acid

HEGGEL®️  Pox 473

Coloured, flexibilised 2-component epoxy resin top sealer for car park surface protection systems

HEGGEL Pox 473 is a flexible, coloured, 2-component epoxy resin top sealer for drivable scattered coatings for indoor car parks and garages. HEGGEL Pox 473 is suitable for application on scattered, flexibilised surface protection systems (OS 11a/b). The top sealer is prepared with low viscosity for good processability and demonstrates good covering power. Top sealing of sanded surfaces results in a slip-resistant and wear-resistant floor coating. HEGGEL Pox 473 is resistant to water and de-icing salts, glycols and battery acids. Alternatively, HEGGEL Flex 545 can be used as a light-resistant top sealer variant for surface protection systems (OS 11a/b).

Characteristics:

  • High chemical resistance
  • Ultra-High Solid
  • Surface tolerant
  • High content of solids
  • Outstanding abrasion resistance
  • Quick drying
  • Very good wet-film stability
  • Easy processing

HEGGEL®️  Pox 484

Universal 2-component epoxy resin primer for car park surface protection systems

HEGGEL Pox 484 is a solvent-free, unfilled and universally applicable 2-component epoxy resin primer, which is used in CAR PARK surface protection systems (OS 8, 11a/b). HEGGEL Pox 484 can be used as a primer and scratch coat in new buildings and renovation. Due to its low viscosity and good wettability, the resin penetrates the substrate very well and thus provides a high-strength base for the subsequent surface protection system. HEGGEL Pox 484 is supplied as a ready- to-use, unfilled primer. For use for scratch coats, the resin is filled with approx. 50 - 80 percentage by weight of HEGGEL quartz sand-mix 2/1.

Characteristics:

  • High solids content
  • Universally applicable
  • Low viscosity
  • High bond strength
  • Economical

HEGGEL®️  Pox 488

Ready-to-use 2-component epoxy resin primer for car park surface protection systems

HEGGEL Pox 488 is a 2-component epoxy resin primer for preparing substrates for subsequent car park coatings. HEGGEL Pox 488 is used as a ready-to-use primer as well as to even out roughness and for levelling. Its preferred use is for subsequent scattered coatings where sufficient levelling is achieved for the subsequent coatings, e.g. OS 8 coatings with HEGGEL Pox 430. Suitable as a primer on all moisture-resistant, dimensionally stable substrates such as concrete and cement screed. The product has very good compressive strength and is suitable for all car park surface protection system applications. However, it can also be used for smooth coatings, which requires double application for normally absorbent substrates. If a levelling compound has to be applied to even out higher levels of roughness, approx. 20 – 50 % of 0.1/0.4 mm fire-dried quartz sand can be added. HEGGEL Pox 488 provides a solid basis for all subsequent surface protection systems and coverings, hardens through quickly without shrinkage. The product has good compressive strength and is suitable for all parking, industrial and commercial flooring applications.

Characteristics:

  • Ready-to-use
  • Hardens quickly and can be coated over
  • High bond strength
  • Economical
HEGGEL®️  FLEX

HEGGEL® Flex bezeichnet eine breite Pallete an Polyurethan-basierten Produkten, die selbst-nivellierende Bodenbeschichtungen und Decklacke beinhaltet.

HEGGEL Flex Beschichtungen bieten bestmögliche Wirtschaftlichkeit, ausgezeichnete Schlagzähigkeit, sehr gute Druckfestigkeit, Rissüberbrückung und hohe chemische Beständigkeit.

HEGGEL Flex Beschichtungen sind ideal geeignet für Produktions- und Verkaufsflächen, Lagerhallen, Messehallen, Garagen und Ausstellungsflächen. HEGGEL Flex Decklacke sind kratzfeste Beschichtungen, die sich neben UV-Beständigkeit durch seidenglänzende Optik auszeichnen.

HEGGEL Flex Decklacke eignen sich sowohl für HEGGEL Flex als auch für HEGGEL Pox Beschichtungssysteme. Die aliphatischen Polyure-thane sind für ihre ausgezeichnete Chemikalien- und Abriebbeständigkeit bekannt.

HEGGEL®️  Flex 510

Low-emission, flexible, 2-component polyurethane coating

HEGGEL Flex 510 is a low-emission, free-flow, 2-component polyurethane coating suitable for smooth, energy-elastic coatings, as well as for slip resistant scattered coatings. The coating has good flow- and smoothing properties and cures with almost no shrinkage. The cured coating is hard and tough but also flexible and resistant to mechanical load. HEGGEL Flex 510 offers special advantages where increased flexibility is necessary due to, e.g. substrate susceptible to deformation, like mastic asphalt, flake boards, metallic and reconstruction substrate. The resistance to chemicals like water, salt solutions, diluted acids and alkalis, mineral oil, and diesel fuel is sufficient. For organic acids polyurethane coatings offer special advantages. Note: HEGGEL Flex 510 is available in different colours. Even though due to its chemical structure the material is not resistant to yellowing. Slight colour tone alteration is possible. Please note our general recommendation on colour / colour tones. Pale colours should be additionally sealed with colour stable HEGGEL Flex 537.

Characteristics:

  • Solvent-free
  • Smooth, pigmented surfaces
  • Suitable for scattering with silicium carbide/ delustering agent
  • Ready-to-use
  • Elastic deformation
  • Resistant to CUI service
  • For reconstruction work
  • Free of deleterious substances against varnish

HEGGEL®️  Flex 515

2-C-PU-self-levelling coating

HEGGEL Flex 515 is a multifunctional industrial floor coating which is suitable for use on a substrates e.g. concrete, cement screed, mastic asphalt (indoor), latexfalt, timber, steel, aluminium, magnesia and anhydrite/gypsum (please consult us!). The combination of high impact resistance, high compressive strength and its crack-bridging properties makes HEGGEL Flex 515 the best economical system choice for use in production plants, sales areas, warehouses, exhibition halls, garages and showrooms. HEGGEL Flex 515 is suitable for both new construction and renovation. Using the high quality HEGGEL Flex - sealers optimizes the surface properties e.g. silk matt finish/UV - resistance, higher abrasion and chemical resistance.

Characteristics:

  • Tough-hard
  • Self-levelling
  • Self-ventilating
  • Can be filled with quartz sand (30 up to 50 %)
  • Up to 80 % natural/renewable raw materials
  • Very high chemical resistance
  • Very high mechanical resistance
  • Crack-bridging (0.3 mm static / unfilled 4 kg/m²)
  • Inert and harmless once cured

HEGGEL®️  Flex 520

Solvent-free, highly photo-stable, flexible, 2-component polyurethane coating for decorative flooring

HEGGEL Flex 520 is a photo-stable, pigmented, 2-component polyurethane coating, cures without shrinkage. HEGGEL Flex 520 is suitable for pale-coloured coatings on decorative interior floors. The flexible cured coating offers special walking comfort. The coating is especially suitable for interior areas with a high demand to the optical appearance, e.g. living rooms, offices, doctor’s offices, fitness centers and wellness areas, schools, and many more. The coating is not suitable for industrially used areas with an increased mechanical load. The flexible floor coating is applicable for layers starting at 1.5 mm. It is also suitable for deformable substrate, like mastic asphalt, or even older substrate, like e.g. reconstruction areas. HEGGEL Flex 520 offers good resistance to many common household chemicals, water, salt solutions, diluted acids and bases. Conditionally resistant to solvents. The coating is available in all standard Colours; the usage is especially reasonable when pale colours are required. HEGGEL Flex 520 offers good resistance to abrasion. Although it is generally recommended to use a suitable sealer, like e.g. HEGGEL Flex 535, or HEGGEL Flex 537 on top. It is necessary to use the transparent sealer HEGGEL Flex 535 when scattering with color flakes. Note: When a low-emission coating is required, use HEGGEL Flex 522.

Characteristics:

  • Highly photo-stable
  • Free flowing
  • Convenient to work with
  • Flexible
  • Solvent-free
  • Results in a decorative surface
  • Economical
  • Free of deleterious substances against varnish

HEGGEL®️  Flex 522

High-quality, highly photostable 2-component polyurethane coating

HEGGEL Flex 522 is a high-quality, free-flow coating based upon a liquid, 2-component polyurethane resin. HEGGEL Flex 522 is used for flexible coatings especially for interior areas with impact sound insulation and decorative features. HEGGEL Flex 522 is used for areas which require good usage, comfort, and an appealing appearance like show-rooms, office- and sale-rooms, hospitals, and so on. On the contrary to other known polyurethane industrial coatings, HEGGEL Flex 522 is made of photo-stable raw materials. Because the coating is pho- to stable even pale, bright, and decorative colour tints are available. The coating has good free-flow and smoothing properties and cures with almost no shrinkage. The cured coating shows good flexibility and is crack-bridging starting at layers of 2 mm. HEGGEL Flex 522 is used for interior areas requiring more flexibility due to the substrate, e.g. mastic asphalt, flake boards, metallic substrates, and reconstruction areas. To increase the walking comfort and to increase the impact sound insulation HEGGEL Flex 522 may be combined with the flexible interlayer HEGGEL Flex 512. The material offers good resistance to water, salt solutions, diluted alkalis, and acids. HEGGEL Flex 522 is available in HEGGEL-standard colours and may also be produced in pale and brilliant special colours. The coating is very suitable for Color flakes scattering. HEGGEL Flex 522 offers good abrasion resistance qualities. Sealing is generally recommended with suitable top sealers like HEGGEL Flex 530, HEGGEL Flex 533, or HEGGEL Flex 535.

Characteristics:

  • Highly photo-stable
  • Smooth, pigmented surface
  • Flexible, crack-bridging
  • Impact sound insulation
  • Solvent-free
  • Low emission
  • Ready-to-use
  • For reconstruction
  • Free of deleterious substances against varnish

HEGGEL®️  Flex 530 & HEGGEL®️  Flex 531

Nicht pigmentierte 2-Komponenten-Polyurethan-Versiegelung für matte Oberflächen & Pigmentierte 2-Komponenten-Polyurethan-Versiegelung für matte Oberflächen

HEGGEL Flex 530 und HEGGEL Flex 531 sind 2-Komponenten-Versiegelungen mit matter Oberfläche, lösemittelhaltig. HEGGEL Flex 530 ist unpigmentiert, HEGGEL Flex 531 ist in verschiedenen Farbtönen erhältlich. Beide Produkte sind lösemittelhaltig und unterliegen der Gefahrgutverordnung. Beide Produkte sind für ebene, matte, gewerblich und industriell genutzte Oberflächen geeignet. Die Versiegelungen sind für Polyurethan- und Epoxidharzbeschichtungen geeignet. Achten Sie auf die Kombinationsmöglichkeiten der Produkte. Vergilbende Polyurethanbeschichtungen sollten mit einer deckenden Versiegelung wie HEGGEL Flex 531 überarbeitet werden. HEGGEL Flex 530 und HEGGEL Flex 531 werden aus hochwertigen Rohstoffen hergestellt. Die Produkte sind vergilbungsbeständig und werden vorwiegend für Bereiche mit dekorativen Anforderungen eingesetzt. In Industriebereichen mit Gabelstaplerverkehr können sich dünne Versiegelungsschichten durch Bremsen abnutzen und es sollte daher im Einzelfall geprüft werden, ob der Einsatz der Versiegelung sinnvoll ist. Das Produkt bietet Beständigkeit gegen verdünnte Säuren und Laugen, Salzlösungen und kurzzeitige Einwirkung von Lösungsmitteln. Polyurethan-Versiegelungsprodukte haben keine ausreichende Beständigkeit gegen Reifen und können bei längerer Einwirkung einen Abdruck hinterlassen. Empfehlenswert sind Epoxidharzversiegelungen wie HEGGEL Pox 470.

Characteristics:

  • Mattes Oberflächenfinish
  • Lösemittelbasiert
  • Gleichmäßiges optisches Erscheinungsbild
  • Sehr wirtschaftlich - durch geringen Verbrauch
  • Beständig gegen Vergilbung
  • Frei von lackschädigen Substanzen

HEGGEL®️  Flex 533 & HEGGEL®️  Flex 534

Nicht pigmentierte 2-Komponenten-Polyurethan-Versiegelung für seidenmatte, fein strukturierte Oberflächen & Pigmentierte 2-Komponenten-Polyurethan-Versiegelung für satinierte, fein strukturierte Oberflächen

HEGGEL Flex 533 und HEGGEL Flex 534 sind 2-Komponenten-Versiegelungen, die sehr abriebfest sind und eine seidenmatte Oberfläche ergeben. Enthält Lösungsmittel. HEGGEL Flex 533 ist eine unpigmentierte Versiegelung, HEGGEL Flex 534 ist in verschiedenen Farben erhältlich. Die Versiegelung führt zu einer fein zotteligen, seidenmatten Oberfläche, die mit geeigneten Kurzflurwalzen aufgebaut werden kann. Verwenden Sie HEGGEL Flex 533 und HEGGEL Flex 534 für dekorative, gewerblich genutzte Flächen. Bei Verwendung des transparenten Systems HEGGEL Flex 533 können Farbflocken zugegeben werden. Die Versiegelung ist für Polyurethan- und Epoxidharzbeschichtungen geeignet. Halten Sie die Verarbeitungszeit in Abhängigkeit von der Produktkombination ein. Vergilbende Polyurethanbeschichtungen sollten mit einer deckenden HEGGEL Flex 534 versiegelt werden. Bei dunkleren, unempfindlichen Farbtönen können transparente Versiegelungen verwendet werden. HEGGEL Flex 533 und HEGGEL Flex 534 werden aus hochwertigen Rohstoffen hergestellt. Die Versiegelung ist nahezu vergilbungsfrei und wird vorwiegend für dekorative Bereiche eingesetzt. Für Industriebereiche mit Flurförderzeugen können dünne Versiegelungsschichten durch bremsende Reifen abgeschliffen werden. Testen Sie die Eignung des Materials. Das Produkt ist beständig gegen verdünnte Säuren und Laugen, sowie Salzlösungen. Vorübergehend beständig gegen Lösungsmittel. Polyurethanbeschichtungen sind nicht ausreichend beständig gegen Reifenabrieb. Bei längerer Standzeit können Reifenspuren entstehen. Verwenden Sie Acrylglas, Karton oder versiegeln Sie mit Epoxidharzversiegelungen, wie z.B. HEGGEL POX 469 oder HEGGEL Pox 470. HEGGEL Flex 533 und HEGGEL Flex 534 enthalten Lösungsmittel und unterliegen der Gefahrstoffverordnung.

Characteristics:

  • Satinierte Oberfläche
  • Enthält Lösungsmittel
  • Fein strukturiert
  • Widerstandsfähig gegen Abrieb
  • Widerstandsfähig gegen Vergilbung
  • Frei von lackbenetzungsstörenden Substanzen

HEGGEL®️  Flex 535 & HEGGEL®️  Flex 535-R10

Emissionsarme, umweltfreundliche und fotostabile 2-Komponenten-Polyurethan-Mattversiegelung & Rutschhemmende, umweltfreundliche und fotostabile 2-Komponenten-Polyurethan-Mattversiegelung

HEGGEL Flex 535 ist eine hochwertige, unpigmentierte 2-Komponenten-Polyurethan-Versiegelung für die matte Endversiegelung von Epoxidharz- und Polyurethanbeschichtungen. HEGGEL Flex 535 basiert auf einer neuen umweltfreundlichen Technologie und bietet eine hervorragende Alternative zu lösemittelhaltigen Versiegelungen und kann diese in weiten Bereichen ersetzen. Die Versiegelung führt zu gleichmäßigen, matten Oberflächen, die ein angenehmes und schönes optisches Erscheinungsbild gewähren. Der reflektierende "Spiegeleffekt" von glänzenden Beschichtungen wird durch die Lichtstreuung der Oberfläche reduziert. Das Produkt wird vorzugsweise für optisch anspruchsvolle Bereiche eingesetzt. HEGGEL Flex 535-R10 ist die Anti-Rutsch-Variante der Versiegelung. Hinweis: Die Verarbeitungshinweise und die technischen Daten der rutschhemmenden Versiegelung unterscheiden sich nicht vom Standardprodukt. HEGGEL Flex 535 härtet durch physikalische Trocknung und chemische Vernetzung zu einem gleichmäßigen, stabilen Film aus. Das Produkt ergibt einen harten und zähen, abriebfesten, fotostabilen Film mit sehr geringer Neigung zur Fleckenbildung. Sehr gut reinigungsfähig. HEGGEL Flex 535 bietet eine gute Beständigkeit gegen wässrige Lösungen, verdünnte Säuren und Laugen, sowie Motor- und Heizöl. Das Produkt zeigt eine sehr geringe Anfärbungsneigung gegenüber Haushaltschemikalien oder stark färbenden Lebensmitteln, Getränken und Tabakwaren wie Bier/Ale, Rotwein oder Cola. Aufgrund der wasserdampfdurchlässigen Kalibrierung kann das Produkt als Versiegelung für wasserdurchlässige Beschichtungen wie HEGGEL Pox 433 verwendet werden. HEGGEL Flex 535 bietet eine gute Haftung auf verschiedenen Untergründen und kann daher nach einem Versuch und Prüfung der Zwischenschicht auch auf älteren Epoxid- und Polyurethanoberflächen eingesetzt werden. Hinweis: Versiegelte Oberflächen sind nur bedingt mechanisch belastbar; Handhabungsgeräte können die Versiegelung beeinflussen oder zerstören. Verwendung im begrenzten Umfang. In sehr oder häufig nassen Bereichen sowie in Bereichen, die Chemikalien ausgesetzt sind, wären lösemittelhaltige Versiegelungen besser geeignet.

Characteristics:

  • Matte Oberfläche
  • Umweltfreundlich
  • Abriebfest
  • Leicht zu handhaben
  • Geruchsarm
  • Wasserdampfdurchlässig
  • Hervorragende Adhäsion
  • Gleichmäßiges Erscheinungsbild

HEGGEL®️  Flex 540

Elastic 2-component polyurethane floating/wear coating for car park surface protection systems

HEGGEL Flex 540 is an elastic 2-component polyurethane coating, used as a floating layer for crack-bridging surface protection systems in accordance with RILI-SIB OS11a/b. HEGGEL Flex 540 is used in the system as an intermediate layer, flexible even at low temperatures, in underground car park and multi-storey car park coatings with an increased risk of crack formation. In accordance with the DAfStb (German Committee for Reinforced Concrete) guideline on the protection and maintenance of concrete structures, the product is suitable for the application of car park surfaces with OS11 coating, with increased dynamic crack-bridging capability for surfaces that can be walked and driven on. HEGGEL Flex 540 is resistant to frost and de-icing salt and permanently protects the fabric of the building against the penetration of water and de-icing salt. HEGGEL Flex 540 is a component of a complete car park system for surfaces that are exposed to different requirements.

Characteristics:

  • Elastic and flexible even at low temperatures
  • Dynamically crack-bridging
  • Resistant to frost and de-icing salt
  • Impervious to liquids

HEGGEL®️  Flex 544

2-Komponenten-Polyurethan-Verschleißbeschichtung Parkhaus-Oberflächenschutzsystem

HEGGEL Flex 544 ist eine elastische 2-Komponenten-Polyurethanbeschichtung, die als Verschleißschicht für rissüberbrückende Oberflächenschutzsysteme nach RILI-SIB OS11a in Tiefgaragen- und Parkhausbeschichtungen eingesetzt wird. Als oberste Verschleißschicht des Systems wird HEGGEL Flex 544 eingesetzt. Dazu wird HEGGEL Flex 544 mit Naturquarzsand der Körnung 0,1/0,3 mm vorgefüllt und die gesamte Fläche mit Naturquarzsand der Körnung 0,3/0,8 mm abgestreut. Das Produkt ist nach der Richtlinie des DAfStb (Deutscher Ausschuss für Stahlbeton) zum Schutz und zur Instandhaltung von Betonbauwerken für die Anwendung von OS 11a-Parkhausbeschichtungen mit erhöhter dynamischer Rissüberbrückungsfähigkeit für begeh- und befahrbare Flächen geeignet. HEGGEL Flex 544 ist frost- und tausalzbeständig und schützt die Bausubstanz dauerhaft vor dem Eindringen von Wasser und Tausalz. HEGGEL Flex 544 ist Bestandteil eines kompletten Parkhaussystems für Flächen, an die unterschiedliche Anforderungen gestellt werden

Characteristics:

  • Lösemittelfrei
  • Sehr gute Fließeigenschaften
  • Elastisch und formbar
  • Strapazierfähig

HEGGEL®️  Flex 545

Licht- und wetterbeständige, flexible 2-Komponenten-Polyharnstoff-Deckversiegelung für OS 11a Oberflächenschutzsystem für den Außenbereich. Top-Versiegelung für wetterfeste Streubeschichtungen im Innen- und Außenbereich

HEGGEL Flex 545 ist eine farbige, lösemittelfreie 2-Komponenten-Polyharnstoff-Deckversiegelung zur Herstellung von licht- und wetterbeständigen Streubeschichtungen. HEGGEL Flex 545 wird in Parkhäusern, auf exponierten Flächen und als Deckversiegelung für rutschhemmende Oberflächen eingesetzt, insbesondere wenn eine lichtbeständige Deckschicht erforderlich ist. HEGGEL Flex 545 ist Bestandteil eines kompletten Parkhaussystems für Flächen, an die unterschiedliche Anforderungen gestellt werden.

Characteristics:

  • Lösemittelfrei
  • Schnell abbindend
  • Viskoplastisch
  • Lichtbeständig
  • Witterungsbeständig
  • Abrieb- und verschleißfest
  • Beständig gegen Tausalze
  • Beständig gegen Glykol, Öl und Batteriesäure
  • Beständig gegen Chemikalien
  • Gute Weichmacherbeständigkeit
  • Schnell regenfest

HEGGEL®️  Flex 550

Flexible, 2-component polyurethane coating and sealing

HEGGEL Flex 550 is a free-flow, solvent-free, 2-component polyurethane coating and sealer. The product is suitable as flexible interlayer underneath coatings. Especially suitable for kitchen areas as well as a crack-bridging sealing coat underneath reactive resin coatings (decorative coatings). Suitable for interior and exterior areas. HEGGEL Flex 550 with a subsequent covering and colour stable top sealer is suitable for areas with light mechanical load. The coat is not suitable for the industrial usage. The coating offers very good flow- and smoothing proper- ties and cures without shrinkage. The cured coating offers high flexibility. HEGGEL Flex 550 offers special advantages where high flexibility is necessary due to the substrate, e.g. for weak and susceptible for deformation substrate like mastic asphalt, flake boards, metallic and reconstruction substrate. The resistance to chemicals like water, salt solutions, mineral oil, diluted alkalis, and acids is sufficient. Limited resistance to concentrated chemicals, like acids, bases, and many more. Low resistance to solvents. Note: HEGGEL Flex 550 is available in different colours. Because of its chemical structure the material is not resistant to yellowing. Slight colour alterations are possible due to technical reasons. Please note our indications on colour / colour tones. Pale colours may additionally be sealed with the colour stable HEGGEL Flex 537. Point load may become visible.

Characteristics:

  • Solvent-free
  • Very good flow properties
  • Flexible and formable
  • Resistant to hydrolysis and saponification
  • Ready-to-use
  • For reconstruction work
  • Free of deleterious substances against varnish

HEGGEL®️  Flex 560

2-Komponenten-Beschichtung auf Polyurethanharz-Basis

HEGGEL Flex 560 ist eine zweikomponentige, lösemittelfreie, farbige und vorgefüllte Spachtelbeschichtung auf Basis eines Polyurethanharzes für die Anwendung auf mineralischen, reaktionsharzgebundenen und auf asphaltgebundenen Untergründen.

Characteristics:

  • Glänzende Oberfläche
  • Kann leicht dekontaminiert werden
  • Leicht zu reinigen
  • Hohe Elastizität
  • Gute chemische Beständigkeit gegen Salz- und Abwasser, verdünnte Säuren, Mineralöle, Schmier- und Kraftstoffe sowie eine Vielzahl von Lösungsmitteln