HEGGEL Coat 101 is a two-component solvent-free coating based on epoxy, with high quality corrosion protective pigments and inhibitors. The special combination with micaceous iron oxide (MIO) in the common DB colour shades, increases the diffusion barrier and thus the corrosion protection and weather resistance at interim weathering of the partial protection system (transport and installation period).

Characteristics:

• High chemical resistance
• Surface tolerant
• High solid content
• Outstanding abrasion resistance
• Quick drying
• Easy processing
• Very good wet-film stability

HEGGEL Coat 111 is a two-component epoxy coating, comprising micro-ceramic particles within a cutting-edge Novolac-resin base, exhibiting outstanding corrosion protection properties. HEGGEL Coat 111 is a cost-effective coating solution with superior abrasion resistance, specifically designed to protect steel structures from corrosion-induced deterioration. Application of HEGGEL Coat 111 can be done through airless spray equipment, allowing for a high-build, single-coat application. However, multiple applications are also possible. Its unique formulation eliminates the need for a primer, though an epoxy zinc primer can be applied if necessary. For manual applications, the specially formulated HEGGEL Coat 122 is recommended, which is optimized for hand application.

Characteristics:

• VOC < 1%
• Exceptional corrosion protection
• Remarkable adhesion strength
• Ambient curing coating
• Consistent temperature resistance up to 100ºC for non-immersed conditions and short-term resistance up to +150°C
• Superior resistance to abrasion
• High impact resistance
• No shrinkage due to plasticizer migration
• Free from heavy metals, benzyl alcohol, coal tar, anthracene oil, and plasticizers
• High resilience to early water stress

HEGGEL Coat 112 is a two-component ultra-high solids epoxy amine engineered specifically for immersion service in ballast tanks, oil tanks, and refined fuel storage tanks. The high build, edge-retentive properties of HEGGEL Coat 112 provide superior protection compared to conventional epoxies.

Characteristics:

• Ultra-high solids
• Engineered specifically for immersion service
• High build, edge retentive properties
• Superior protection compared to conventional epoxies.

HEGGEL Coat 118 is a versatile two-component epoxy coating that delivers exceptional performance for both internal and external applications. With micro-ceramic particles and an advanced resin base, it offers reliable corrosion protection for steel structures. Cost-effective and easy to apply using airless spray equipment, HEGGEL Coat 118 eliminates the need for a primer, though it can be used with an epoxy zinc primer if necessary. Its durability and resistance make it an ideal choice for protecting surfaces against corrosive agents and environmental factors.

Characteristics:

• Excellent corrosion protection
• Remarkable adhesion strength
• Temperature resistance up to 90ºC for non-immersed conditions and short-term resistance up to +130°C
• Single-layer, solvent free
• Ambient curing coating
• High abrasion resistance
• High impact resistance
• Excellent weatherability

HEGGEL Coat 122 is a two-component epoxy coating with HEGGEL - bionic technology, free of benzyl alcohol and nonylphenol and VOC < 1 %. HEGGEL Coat 122 is an innovative, economical, abrasion resistant coating which is especially suitable as corrosion protection of steel constructions for hydraulic engineering.

Characteristics:

• Very good corrosion protection
• Very high abrasion resistance
• Low viscosity
• Very good adhesion strength
• No shrinkage by migration of plasticizer
• Inert and harmless once cured

HEGGEL Coat 125 is a two‑component epoxy-based coating incorporating advanced bionic technology. It provides superior abrasion resistance and offers outstanding mechanical and chemical resistance, along with excellent corrosion protection. The coating can be applied using airless spray equipment, enabling high‑build single‑coat application; however, multiple coats can also be applied if required. Its unique formulation eliminates the need for a primer, although an epoxy zinc primer may be used when necessary.

Characteristics:

• Exceptional corrosion protection
• Remarkable adhesion strength
• Suitable for cathodic protection systems
• Inert and harmless once cured
• High impact resistance
• VOC < 2%
• Superior resistance to abrasion
• High chemical resistance
• No shrinkage due to plasticizer migration
• Free from heavy metals, benzyl alcohol, coal tar, anthracene oil, and plasticizers

HEGGEL Coat 130 is a two-component, solvent-free and pasty coating based on an advanced novolac epoxy resin and an amine hardener, developed in full accordance with DIN EN 10289:02.2002. It is designed for processing with a 2-component airless hot-spray system and forms a dense protective layer with excellent mechanical strength, high temperature resistance, and reliable long-term durability under demanding service conditions.

Characteristics:

• High chemical resistance across a wide range of chemicals
• High chemical resistance across a wide range of chemicals
• Excellent abrasion and impact resistance
• High resistance to cathodic disbondment at temperatures up to 180 °C
• Resistant against hydrogen
• VOC-free

HEGGEL Coat 141 is a two-component epoxy coating with bionic corrosion inhibitor. HEGGEL Coat 141 is designed for use as high-performance chemical and abrasion resistant coating and offers excellent anticorrosion properties combined with good resistance to aggressive, flammable and non-flammable liquids and chemicals. Its free of benzyl alcohol and nonylphenol and VOC<2%. HEGGEL Coat 141 must be applied by using airless spray equipment with a flow heater.

Characteristics:

• Electrically conductive
• Excellent corrosion protection
• Airless sprayable
• Thixotropic
• High chemical resistance
• Good thermal resistance
• Very good adhesion strength
• Suitable for single layer application
• Inert and harmless once cured

HEGGEL Coat 145 is a two-component, liquid, solvent-free epoxy based coating with amine hardener designed for protection applications requiring direct contact with potable water. The coating is applied using a 2-K or 1-K airless hot spray system and forms a protective layer with high film build. It can achieve a 900 μm layer thickness in one application. The formulation is designed with reference to the technical requirements of BS 6920:2014 and AWWA C210.

Characteristics:

• Good corrosion resistance
• Designed for potable water applications
• Solvent-free
• High-build application in a single coat

HEGGEL Coat 151 is a two-component polyurethane spray coating, coloured. It is resistant to acids and alkalis. HEGGEL Coat 151 if sprayed in multiple passes on vertical surfaces, it can be built up to a considerable thickness. HEGGEL Coat 151 has a high resistance to abrasion.

Characteristics:

• Tough-hard
• Softener free
• Glossy finish
• Very high chemical resistance
• Very high mechanical resistance
• Inert and harmless once cured

HEGGEL Coat 152 is a two-component polyurethane spray coating consisting of a viscous part A (Base) – a polyol, and a liquid part B (Hardener) – an isocyanate, designed for protection of Internal and external coating of equipment. HEGGEL Coat 152 should be applied with 2-component airless hot spray system. It is solvent-free and does not contain any VOC..

Characteristics:

• Excellent corrosion protection
• Fast-curing formulation
• Temperature resistance of -20 °C to 95 °C (Short-term: 110 °C (without temperature gradient to the substrate))
• Applied with impingement gun - no solvent flushing necessary
• Rapid achievement of mechanical strength
• Easy to use
• Solvent-free

HEGGEL Coat 155 is a two-component polyurethane spray coating, designed for high-performance protection of steel and concrete structures. The product forms a tough-hard, high-gloss film with excellent abrasion resistance that is resistant to acids and alkalis, offering outstanding chemical and mechanical durability. Because of its fast-curing formulation, HEGGEL Coat 155 must be applied exclusively with plural-component spray equipment and can be built up in multiple passes to achieve considerable thickness on vertical surfaces.

Characteristics:

• Tough-hard
• Free from softeners
• High-gloss appearance
• Fast-curing formulation
• High abrasion resistance
• Superior chemical resistance
• Very high mechanical resistance
• Inert and non-hazardous once cured
• VOC < 500 g/l

HEGGEL Coat 156 is a two‑component, liquid, solvent‑free polyurethane coating based on polyol and isocyanate. The formulation of HEGGEL Coat 156 has been developed with consideration of the technical requirements of KTW-BWGL, ÖNORM B 5014 Part 1, and AWWA C222-18. HEGGEL Coat 156 is designed for application using a two‑component airless hot‑spray system and forms a dense, continuous protective layer providing excellent corrosion protection and reliable long‑term durability under demanding service conditions.

Characteristics:

• Good chemical and water resistance
• Extremely rapid reaction and curing
• Rapid development of mechanical properties
• VOC-free
• Outstanding corrosion protection
• High resistance to cathodic disbondment at temperatures up to 80 °C

HEGGEL Coat 157 is a two-component dissipative and flame-retardant polyurethane coating based on polyol and isocyanate chemistry. The product is designed for application using a 2-component airless hot-spray system and forms a continuous protective layer providing reliable corrosion protection and durable performance under demanding service conditions.

Characteristics:

• Excellent corrosion protection
• Antistatic properties (AS)
• Dissipative conductivity below 1 GΩ
• Non-flammable
• Good chemical resistance
• High abrasion resistance
• Solvent-free
• VOC: 0% (VOC-free)

HEGGEL Coat 160 is a two‑component, high‑solids, low‑aromatic, EPA‑compliant epoxy coating reinforced with micaceous iron oxide (MIO). It delivers excellent sealing performance, strong mechanical resistance, and very good corrosion protection. The formulation is designed to function both as a high‑quality primer and as a coating with outstanding application properties. Its high‑solids content and low‑aromatic formulation make it ideal for projects where solvent emissions must be minimized and working conditions optimized, while also ensuring very low odour levels.

Characteristics:

• Exceptional corrosion protection
• Outstanding barrier performance
• Remarkable adhesion strength
• High flash point enhances safety during storage and application
• Low hazard product with favourable working conditions
• Superior flexibility
• High chemical resistance to water spills, a wide range of solvents, and chemicals
• Suitable for use in coating systems designed in accordance with NORSOK M-501
• Ready to spray at 70% volume solids
• VOC ≤ 250 g/l

HEGGEL Coat 162 is a two-component, high-solids epoxy primer / coating based on anti-corrosion pigments and inert fillers. It provides excellent corrosion protection and is designed for easy application at high film thickness with very good build on sharp edges. The coating can be used as a multipurpose primer or finish within epoxy coating systems.

Characteristics:

• Superior corrosion protection
• Extreme barrier performance
• High adhesion strength
• High flexibility
• Resistant to water spill, various solvents and chemicals
• Suitable for indoor applications as a single-coat system or as a primer/coating in epoxy systems
• Suitable for steel, galvanized steel, and aluminium substrates
• VOC ≤ 290 g/l

HEGGEL Coat 165 is a two-component, surface-tolerant, biobased aluminum mastic/primer/coating based on special epoxy resins and a modified phenalkamine curing agent. The aluminum mastic variant is designed to comply with EPA requirements while providing reliable corrosion protection and strong adhesion on less-than-ideal surfaces. It is developed as a maintenance primer/coating for steel structures, suitable for application on Sa2½ blast-cleaned surfaces, and designed to also provide adequate performance on lower preparation levels such as St2 and hand-prepared substrates, as well as on existing coating systems. Due to its early water resistance, it can be applied at high relative humidity (up to 90%) and on damp surfaces. The coating is recoatable with itself, as well as with epoxy, polyurethane, vinyl, and alkyd coatings, offering flexibility in maintenance and repair applications.

Characteristics:

• Heavy-duty performance
• Biobased epoxy mastic
• Remarkable mechanical strength
• Good abrasion resistance
• Resistant in marine splash zones and offshore exposure
• Very tight, impenetrable coating
• Suitable for immersion service
• Curing at low temperatures (min. 5 °C)
• Easy application by airless spray and brush or roller
• Early water resistance
• VOC ≤ 160 g/l

HEGGEL Coat 170  is a one-component heat-resistant coating based on high-quality silicone resins, designed for application as a topcoat in coating systems for steel structures exposed to elevated temperatures. The coating provides thermal resistance up to 400 °C for black shades and up to 550 °C for aluminium shades under dry load conditions. When used in combination with the HEGGEL Coat 178 primer as part of a suitable multi-layer coating system, corrosion protection up to class C4 can be achieved.

Characteristics:

• Heat-resistant topcoat for coating systems on steel
• Provides resistance at elevated temperatures
• Applicable by spray, brush, and roller
• VOC ≤ 540 g/l

HEGGEL Coat 175 is a two-component, high-solid, tar replacement epoxy-based coating reinforced with micaceous iron oxide (MIO). It provides very good corrosion protection. Its formulation as a high-build, flexible coating allows use as both a primer and a coating, offering extremely low permeability (diffusion resistance factor μ > 90,000).

Characteristics:

• Exceptional corrosion protection
• Outstanding barrier performance
• Remarkable adhesion strength
• High mechanical strength
• Applicable at 5 °C and 90% relative humidity
• Superior flexibility
• High chemical and water resistance; suitable for immersion service
• VOC ≤ 250 g/l
• Extreme impermeability

HEGGEL Coat 178 is a heat-resistant, high-solids anti-corrosive primer based on high-quality silicone resins and reinforced with zinc and micaceous iron oxide pigments. The primer provides anti-corrosive protection and maintains performance under thermal stress at elevated temperatures.

Characteristics:

• Suitable as a primer for multi-layer protective systems
• Provides resistance at elevated temperatures
• Heat-resistant up to 550 °C (dry load)
• VOC ≤ 270 g/l

HEGGEL Coat 179 is a two-component, inorganic zinc silicate anti-corrosive primer based on self-curing technology. The coating contains a high level of metallic zinc and provides durable corrosion protection combined with dry heat resistance up to 400 °C. The formulation allows efficient single-coat application while maintaining strong anti-corrosive performance.

Characteristics:

• Self-curing technology
• Suitable for heavy-duty industrial and marine environments
• Matt finish
• Dry heat-resistance up to 400 °C
• High zinc content
• VOC ≤ 530 g/l

HEGGEL Coat 190 is a one-component special acrylate hydro polymer. It is an economical, weatherproof, coloured topcoat which is especially suitable as protection against weather conditions and aggressive atmospheric influences. Due to the special acrylate polymer combination, it is possible to achieve abrasion resistant surfaces which are easy to clean. It is water-based and VOC < 25 g/L.

Characteristics:

• UV - resistant and UV - protective
• Good coverage
• Water-based
• For indoor and outdoor use
• Very good adhesion on most surfaces
• Fast drying
• Silk matt finish

HEGGEL Coat 191 is a one-component special acrylate polymer. It is an economical, weatherproof, protective and coloured topcoat. It protects surfaces against aggressive influences from the atmosphere with self-cleaning properties up to a certain extent. Due to the special acrylate polymer combination, it is possible to achieve abrasion resistant surfaces which are easy to clean. It contains solvents and VOC < 500 g/L.

Characteristics:

• UV - resistant and UV - protective
• Good coverage
• Fast tack-free surface after application
• For outdoor use
• Excellent adhesion on most surfaces
• Silk matt finish

HEGGEL Coat 195 is a two-component, solvent-based and tough-hard polyurethane topcoat. Because of its aliphatic nature, it shows excellent chemical and abrasion resistance specially against lubricants, fuels, saline solutions, diluted acids and alkalis. It can achieve a highly aesthetic silk gloss finish on HEGGEL Coat systems. HEGGEL Coat 195 is coloured with high pigment content which is inert and harmless once cured.

HEGGEL Coat 197 is a two-component, high-gloss, high-build polyurethane topcoat based on hydroxyl acrylate and aliphatic isocyanate. It provides excellent durability and is specifically developed for protection under critical climatic and maritime conditions. The coating offers outstanding colour and gloss retention, making it suitable for applications requiring long maintenance intervals.

Characteristics:

• High mechanical strength and durability
• Excellent colour stability (non-yellowing)
• Capable of anti-graffiti properties when used with a designated activator (Contact HEGGEL)
• Remarkable outdoor durability
• Good scratch resistance
• Resistant to mildly aggressive chemicals
• VOC ≤ 435 g/l
• Low dirt pick-up characteristics

HEGGEL Coat 198 is a two-component, medium-solids, high-gloss polyurethane topcoat based on hydroxyl acrylate and aliphatic isocyanate. It is formulated as a sustainable finish for protection under critical climate and marine circumstances. The coating is designed for applications where high demands are set for colour and gloss retention.

Characteristics:

• Durable colour and gloss retention
• Topcoat in industrial epoxy and polyurethane coating systems
• Resistant to chemicals, weathering and mechanical impact
• VOC: 440 g/l